--> 

E. A. Værktøj A/S
+45 54 85 96 66

SPARTUS®
MasterMIG 250PFC SYNERGY



SYNERGY MIG 3 in 1


1 / 6



The possibility of a professional TIG LIFT
welding with microswitch torch. zdalne sterowanie
The possibility of use SPARTUS® Spool Gun
with built-in wire feeder. More...
spool gun

Technical parameters

Input ~1× 230V ± 10% 50 / 60 Hz
Welding current MIG [A] 25 – 250
Duty cycle MIG [%] 60
MIG PARAMETERS
Output working voltage MIG [V] 26,5
Wire feeding speed [m/min] 2,5 – 16,5
Wire feeder built-in, 4-roll gear
Welding wire spool [kg]/[mm] ≤ 15 / ∅300
Wire diameter ∅ [mm] 0.6 / 0.8 / 1.0 / 1.2
Synergic tak
Synergic programs 20 dedicated
Inductance control 0 - 10
Brazing (CuSi) tak
Slow feed 0 - 10
Burnback 0 - 10
2T/4T Control tak
TIG PARAMETERS
TIG DC welding tak
Welding current TIG [A] 10 – 250
Duty cycle TIG [%] 60
Down slope [s] 0 – 10
Post-gas [s] 0 - 10
Arc ignition LIFT
MMA PARAMETERS
MMA welding mode tak
Welding current MMA [A] 10 – 250
Duty cycle MMA [%] 60
ARC FORCE 0 - 10
HOT START 0 - 10
No-load voltage [V] 14
OTHER
PFC tak
Current consumption [A] 27
Power factor (cosφ) 0,99
Efficiency η [%] 85
Insulation classH
Protection class IP23
Weight [kg]25
Dimensions [mm]620 × 240 × 450
Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge

Description:

SPARTUS® MasterMIG 250PFC SYNERGY is a professional, portable, multi-process welding semi-automatic device. It enables MIG/MAG, TIG and MMA welding with maximum welding current of 250A. The unit is powered from a single-phase network 230V.

The device was produced with using of modern solutions such as inverter technology, IGBT power transistors, MCU controller, PWM technology, PFC filter. All of our technology solutions provide stable output performance under a variety of conditions, which has a direct effect on outstanding arc characteristics and welded joint quality.

The device has a number of functions that support MIG / MAG welding processes:

- Synergistic MIG/MAG welding mode: 20 dedicated programmes.
- Wave Control - precise arc dynamics adjustment Wave control ensures full control over the welding arc: it allows to reduce the amount of welding splashes and controls the width and depth of fusion.
- Burn Back - precise adjustment of welding wire burning speed allows limit a risk of sticking the welding wire to the contact tip.
- Slow Feed - so called gentle start-up of the wire feeder, recommended especially during welding with high amperage and high speed of wire feed. Smooth start of wire feed eliminates the risk of welding defects at the beginning of the weld.
- 2T / 4T - Choice of one of two operating modes.
- Spool Gun - possibility of welding with type Spool Gun welding holder.


The SPARTUS® MasterMIG 250PFC Synergy also has a number of features that support TIG welding processes (2T/4T mode, current falling speed adjustment, post-gas) and MMA (Hot Start for easier electrode ignition, Arc Force for easier welding in forced positions, VRD lower no-load voltage). Functional panel is equipped with a 480x320px colour LCD with an intuitive user interface. It is possible to choose one of several language versions of the control software (English, German, Czech, Slovak, Lithuanian, Spanish, Portuguese, Russian, French, Serbian, Polish). By default, the Polish language version of the interface is set.

SPARTUS® MasterMIG 250PFC SYNERGY is equipped with a professional four-roll wire feeder, which allows you to work with a long welding handle regardless of the type of wire used. Despite the small compact size and weight, the device is compatible with standard spools with welding wire D200 and D300 weighing up to 15kg.

Examples of applications: workshop work, renovation works in the field, automotive - welding of galvanized car bodies (brazing), muffler welding, production sector, light industry.

Device SPARTUS® MasterMIG 250PFC SYNERGY:

Device SPARTUS® MasterMIG 250PFC SYNERGY

3m work clamp

Gas hose

User's manual

Package price [DKK]:

cena

SPARTUS® MasterMIG 250PFC SYNERGY package:

Device SPARTUS® MasterMIG 250PFC SYNERGY

MIG gun SPARTUS® SPM 240

3m electrode holder

3m work clamp

Gas hose

User's manual

Package price [DKK]:

cena

NOVELTY! Choose the length of the MIG gun yourself!
The price of the package includes the option of choosing a 3-, 4- or 5-meter MIG gun.

Lack of information results in random length selection.

SPARTUS® EasyMIG 210E

SPARTUS® EasyMIG 220E Pulse Synergy

SPARTUS®
MasterMIG 200PFC

SPARTUS®
MasterMIG 250PFC SYNERGY

SPARTUS®
MasterMIG 250 DUAL PULSE SYNERGY

SPARTUS® MasterMIG315C

SPARTUS®
MasterMIG 250W DUAL PULSE SYNERGY

SPARTUS® MIG420H

SPARTUS® MIG420HW

SPARTUS®
MIG500W SYNERGY

SPARTUS®
ProMIG 500 DUAL PULSE SYNERGY

Home page Contact Site map